Skip to main content

Piranha Solutions

Piranha solutions are highly reactive chemical mixtures commonly used in research and microfabrication laboratories to remove organic residues from substrates and laboratory equipment. The most common formulation is a 3:1 mixture of concentrated sulfuric acid and 30% hydrogen peroxide.  Always follow the Standard Operating Procedure (SOP) for handling piranha solutions.


Warning: Piranha solutions are extremely energetic oxidizers. Preparation and use can generate significant heat, vigorous reactions, and oxygen gas. Improper handling may result in explosions, fires, chemical burns, thermal burns, and serious injury. Vapors and mists may also cause respiratory irritation.

Safe Handling Practices

  1. Use only compatible containers. Glass containers, preferably Pyrex® or equivalent borosilicate glass, must be used. Piranha solution can degrade many plastics, resulting in container failure.
  2. Label all containers. Clearly identify all containers holding piranha solution or piranha waste.
  3. Work in a chemical fume hood. Prepare and use piranha solutions only in a functioning fume hood with the sash positioned as a protective barrier.
  4. Wear appropriate personal protective equipment (PPE):
    1. Acid-resistant lab coat and/or chemical-resistant apron
    2. Sleeve covers, if applicable
    3. Butyl rubber or other approved chemical-resistant gloves
    4. Chemical splash goggles
    5. Additional face protection as required by local procedures
  5. Always add hydrogen peroxide to sulfuric acid. Add peroxide slowly while gently stirring. Never add sulfuric acid to hydrogen peroxide.
  6. Control peroxide concentration. Hydrogen peroxide concentrations should remain below 30% and must never exceed 50%.
  7. Anticipate significant heat generation. Temperatures can exceed 100°C (212°F) during preparation. Handle solutions carefully to prevent thermal and chemical burns.
  8. Keep away from incompatible materials. Contact with incompatible materials may result in violent reactions, fire, or explosion. Never mix piranha solution with:
    1. Organic solvents
    2. Organic acids
    3. Organic materials
    4. Bases (including photoresist residues)
    5. Any unknown substances
  9. Use only clean, residue-free materials. Containers and substrates should be thoroughly rinsed and dried before contact with piranha solution.
  10. Add materials slowly. When immersing substrates into a piranha bath, introduce items gradually and allow the solution to stabilize between additions.
  11. Never seal fresh piranha solution. Freshly prepared piranha solution must never be stored in a closed or partially closed container due to gas generation and pressure buildup.
  12. Allow solutions to fully react after use. Leave spent piranha solution in a properly labeled, open container inside a fume hood until all reaction activity has ceased and the solution has cooled completely.

Storage

Piranha solution should not be stored prior to use due to its highly reactive nature. Prepare only the quantity necessary for immediate work.
Any excess or spent solution must be managed according to the disposal procedures outlined below.

Disposal

Please refer to the following link to submit a waste pickup

Spent piranha solution must be collected as hazardous waste. Piranha solution may only be handled for disposal after it has:

  • Fully reacted
  • Cooled to room temperature
  • Released any reaction-generated gases
  • Been determined safe for further processing

Collection Requirements

  1. Use a clean, compatible container, such as a recycled sulfuric acid bottle.
  2. Initially transfer a small amount of the spent solution to verify that no residual contamination is present in the waste container.
    If no adverse reaction occurs, continue transferring the solution slowly.
  3. Clearly label the container as Waste Piranha Solution. Do not mix any other waste streams with piranha waste.

Waste Storage Cap Requirements: Store collected waste in a compatible container equipped with a vented cap to prevent pressure buildup.

Emergency Procedures

For all spills and exposures, use Emergency Phone or call 607-255-1111 for emergency assistance.

Skin Contact: Immediately flush the affected area with copious amounts of water for at least 15 minutes. Remove contaminated clothing while rinsing. Seek medical attention promptly.
Eye Contact: Immediately use an eyewash station and flush the affected eye(s) continuously for at least 15 minutes, holding eyelids open. Seek medical attention immediately.
Inhalation: Move the exposed person to fresh air. Seek medical attention if exposure is suspected. Symptoms may include respiratory irritation, coughing, difficulty breathing, or chest tightness. Effects may be delayed.
Ingestion: Seek immediate medical attention.